An engine is a complex machine composed of many mechanisms and systems. Whether it is a gasoline engine or a diesel engine; Whether it is a four stroke engine or a two stroke en...
The engine used in gasoline model cars has a bias power and torque. The aircraft model engine is biased towards the speed. The crankcase of gasoline engines is larger, so the ou...
What Kind Of Engine Oil Is Better For Aircraft Model Gasoline Engines? The engine oil used in the aviation model gasoline engine needs to have certain performance requirement...
There are generally two types of aircraft model engines, one is a methanol engine (also known as an electric methanol engine), and the other is a gasoline engine. Small aircraft...
1) When using a model aircraft engine the operating procedures and regulations on load reduction and deceleration during the running in period must be strictly followed; 2) Mai...
Cylinder pulling refers to the phenomenon of scratches and scratches occurring in the area where the inner surface of the cylinder liner contacts the reciprocating motion of the...
1. Reduce ignition advance angle; 2. Use gasoline with a grade (octane number) that matches the regulations; 3. Remove carbon deposits from the combustion chamber; 4. If a knock...
1. Detonation will suddenly generate shock waves in the cylinder, striking in all directions, causing strong vibration of the engine's pistons, cylinder walls, connecting rods...
Gasoline engines can cause detonation. To analyze the phenomenon of detonation, it is necessary to understand the causes and solve the problem based on the root cause. The combu...
An engine is a machine that converts chemical energy into mechanical energy, and its conversion process is actually a working cycle process. Simply put, it burns the fuel in the...
Due to the smaller size and mass of gasoline engines compared to diesel engines under the same power conditions; Good torque characteristics, good starting and acceleration perf...
Due to its low viscosity and fast evaporation, gasoline can form a uniform mixture with air outside the cylinder, which can then be sucked into the cylinder or injected into the...
