EPHIL AET Ignition System For Single-Cylinder Glow Plug Engine

Parameters

Model: AET Power System Version G-1.1

Input Voltage: 6V --- 8.4V

Output Voltage: 0V --- 1.6V

Work electric Current: 600 mA --- 700mA

Work Temperature: -10°C --- 60°C (14°F --- 140°F)

Size: 57.5×32.5×10 mm (2.26×1.28×0.40 in)

Net Weight: 30g

(For single-cylinder engine.)

­­

Installation

①. AET Power System. To avoid shaking or movement, make sure it is fixed inside the model aircraft.

②. Power input wire. Connecting to the battery or kill switch. ­­

③. Tachometer signal wire. Connecting to the tachometer.

④. Output wire (black color, -). Connecting to the metal surface or parts of the engine. (eg. metal engine mount; screw for Hall sensor)

⑤. Output wire (red color, +). A glow plug should be plugged in the plug cap of this red wire.

⑥. Glow plug. The plug cap and glow plug will extremely hot when the engine is running (or after running). Be careful and do not touch with bare hand.

⑦. Hall signals receive wire. Connecting to the ignition Hall sensor.